Water Arts Consulting   

Compact settlement vortex chamber for small koi pond, goldfish pond or quarantine tank applications.

Specifications:

• 3" Inlet (includes 3" rubber coupler)
• 2" Discharge (includes 2.5" x 2" rubber coupler connection)
• 1" FPT drain (includes 1" ball valve)

Height:  24"

Diameter:  20"

True conical bottom

Can be used for low-flow gravity fed (1500gph or less) or pump fed.

Connect to bottom drain or surface skimmer.

FREE SHIPPING!

The Proficlear Open Chamber can be used for numerous applications.

• As a pump chamber it allows for a filtration pump to be placed in the correct position, reduce pressure losse & protects it from sludge.  This application is usually used as a last stage in a "gravity-fed" configuration.  In some instances, it can be the first stage w/inlets for bottom drains & mid-water intakes as well.
  

Click on the images below to zoom in.

• As a supplemental bio-media chamber.  Fill the unit w/the bio-media (moving bed or static) of your choice & add it in series w/the other units for specific stage-by-stage filtration.
• As a settlement chamber.  The large capacity allows for water to be drawn in at a slow rate for larger debris to sink/settle to the bottom before moving onto the next stage

Proficlear modules are made w/sturdy GRP (glass reinforced plastics) which will withstand the extremes in freezing as well as heat.  These units will never bow from water pressure even when free-standing.

• Dimensions:  32" Tall x 24" Deep x 32" Wide
• Inlets:  3 inlet options (6", two 4", or two 2")
• Includes:

• 4" Valterra Knife-gate Valve
• Grated floor (for pump support)
• Slanted base
• Sludge valve (1.5" knife-gate for waste discharge)
• Airline tubing connection (3/16")
• GRP lid

Ships palletized via truck freight only.  Ask about our discounts when purchasing multiple modules!  Click here.

The Proficlear 300 Micron Sieves Chamber is a pre-filtration module used for solids/coarse debris extraction down to 300 Microns.

• Solids separation allows for efficient biological filtration in the following modules.  It can replace the large footprint of a settlement chamber (in gravity-fed applications) or be located after a settlement chamber in applications where high debris load requires numerous stages of mechanical filtration (in pump-fed applications).

Click on the images below to zoom in.

Proficlear modules are made w/sturdy GRP (glass reinforced plastics) which will withstand the extremes in freezing as well as heat.  These units will never bow from water pressure even when free-standing.

• Dimensions:  32" Tall x 24" Deep x 32" Wide
• Inlets:  3 inlet options
  • One 6"
  • One 4"
  • Two 2"
• Includes:
  • 2 - 300 micron wedge-wire cylindrical sieves (interior & exterior cleaning brushes built-in)
  • Slanted base
  • Sludge valve (1.5" knife-gate for waste discharge)
  • Cleaning indicator
  • Thermometer
  • Pre-cautionary overflows
  • Airline tubing connection (3/16")
  • GRP lid

Ships palletized via truck freight only.  Ask about our discounts when purchasing multiple modules!  Click here.

The Proficlear M3 Filter Foam Chamber is a transitional module making use of the last stage of mechanical filtration & the start of biological filtration.  Dual density foam pads create aerobic zones for nitrification. 

Click on the images below to zoom in.

Proficlear modules are made w/sturdy GRP (glass reinforced plastics) which will withstand the extremes in freezing as well as heat.  These units will never bow from water pressure even when free-standing.

• Dimensions:  32" Tall x 24" Deep x 32" Wide
• Inlets:  3 inlet options
  • One 6"
  • One 4"
  • Two 2"
• Includes:

• 6 - Dual density filter foam
• Slanted base
• Sludge valve (1.5" knife-gate for waste discharge)
• Cleaning indicator
• Thermometer
• Pre-cautionary overflows
• Airline tubing connection (3/16")
• GRP lid

Ships palletized via truck freight only.  Ask about our discounts when purchasing multiple modules!  Click here.

The Proficlear M4 Bioballs Biological Chamber is the workhorse for biological filtration.  Beneficial bacteria housed in this chamber prove a critical role in converting ammonia waste into nitrites & then nitrates. 

Click on the images below to zoom in.

Proficlear modules are made w/sturdy GRP (glass reinforced plastics) which will withstand the extremes in freezing as well as heat.  These units will never bow from water pressure even when free-standing.

• Dimensions:  32" Tall x 24" Deep x 32" Wide
• Inlets:  3 inlet options
  • One 6"
  • One 4"
  • Two 2"
• Includes:

• 600 Bioballs
• Slanted base
• Sludge valve (1.5" knife-gate for waste discharge)
• Cleaning indicator
• Thermometer
• Pre-cautionary overflows
• Airline tubing connection (3/16")
• GRP lid

Ships palletized via truck freight only.  Ask about our discounts when purchasing multiple modules!  Click here.

The Proficlear M5 Phosphate Binding Chamber provides the final polish in the water through dense filter foam.  This zone also provides for the denitrification process of releasing Nitrogen gas.  Phosphate binding cartridges of Phosless remove the nutrients out of the water & aids tremendously in the reduction of string algae development.

Click on the images below to zoom in.

Proficlear modules are made w/sturdy GRP (glass reinforced plastics) which will withstand the extremes in freezing as well as heat.  These units will never bow from water pressure even when free-standing.

• Dimensions:  32" Tall x 24" Deep x 32" Wide
• Inlets:  3 inlet options
  • One 6"
  • One 4"
  • Two 2"
• Includes:

• 6 polishing foam
• 4 phosless media cartridges
• Slanted base
• Sludge valve (1.5" knife-gate for waste discharge)
• Cleaning indicator
• Thermometer
• Pre-cautionary overflows
• Airline tubing connection (3/16")
• GRP lid

Ships palletized via truck freight only.  Ask about our discounts when purchasing multiple modules!  Click here.

Livingponds® Versatile Filters allow you to be more creative with the placement of your biological filtration system. Unlike filters that have to be placed at the top of the waterfall, the Versatile Filter can be hidden easily behind fences, shrubs, or surrounding landscape - up to 10' away from the pond.

These units' injection-molded housings are rigid enough to use above or below ground.  The Versatile filter features a 2" outlet that can be connected to a standard MPT PVC adapter.

Savio Livingponds® filters were engineered to harness the natural dynamics of moving water. Their cylindrical design puts pond water into a self-cleaning, highly dynamic "spin cycle". This process removes the heaviest debris before it gets to the filter media, and ensures that water is evenly distributed throughout the filter chamber. The net result is a filter that operates nearly 4x more effectively than competitive products.

Cleaning a Livingponds® filter is a breeze! All Savio Livingponds filters use Savio Springflo – the original, patented media that resists clogging, compaction and channelling. To clean, gently agitate the media, then drain the filter. Using the optional bottom drain accessory (sold separately) simplifies this task even further - allowing you to empty nutrient-rich pond water to your garden. No fuss, no muss, and no ruined clothing.

Savio Livingponds® filters complete filtration for ponds up to 5,000 gallons. But if you need to add more filtration capacity for ponds over 5000 gallons, that's no problem – Savio's modular design makes it easy to connect multiple units together.

Click here for further details & specifications.